Тема: Oscam DreEmu обсуждение модификаций под различные имиджи

[nosovdm]

А для 11 домики какой?
Брал от сюда Извините, но гости не могут просматривать ссылки. Регистрация или Логин для 10 домики.
Оскам запускается но файлы initial_snippet.bin и  snippet.tbl91 не создаются.
В чем может быть проблема?
 

[MIC71]

initial_snippet.bin этот файл должен быть уже там , в папке oscam должно быть 4 файла , это

initial_snippet.bin
libdreemu.so
libdreicg.so
oscam.conf

а ee.bin и snippet.tbl91 должны создатся при первом же запуске , если вы стоите на каком либо канале ТК , если смотрите шaрик то они не создадутся

   Не получается поставить. Ни из Тельнета ни при помощи плагина. Оскам в меню не появляется.

а какую ошибку с телнета выдаёт или ты с пульта ставил ? пробни так , кидаешь в папку tmp , дальше с телнета даём команду лучше скопируй а то опять ошибёшься в букве , тире или пробеле ...
init 4
затем так
opkg install -force-overwrite /tmp/*.ipk
либо так
opkg --force-overwrite --force-depends install /tmp/*.ipk
и потом
init 3

Если при установке в телнете выбивает какую то ошибку сюда скрин или содержимое с ошибкой киньте

[nosovdm]

[/quote]

initial_snippet.bin этот файл должен быть уже там , в папке oscam должно быть 4 файла , это

initial_snippet.bin
libdreemu.so
libdreicg.so
oscam.conf

а ee.bin и snippet.tbl91 должны создатся при первом же запуске , если вы стоите на каком либо канале ТК , если смотрите шaрик то они не создадутся

ee.bin и snippet.tbl91 не создаются после запуска.
Шары нет стою на 12226)
Где хранится скрип запуска?

[MIC71]

в etc/init.d файл softcam.oscam , если путь для создания этих файлов то в etc/tuxbox/config/oscam/oscam.conf
конкретно тут
[3kemu external /etc/tuxbox/config/oscam/libdreemu.so ua=6600000000000000 params=/etc/tuxbox/config/oscam/ee.bin ident=4ae1:11 postdr=3kicg delay=100 emmcache=1,3,2 group=1]
[3kicg external /etc/tuxbox/config/oscam/libdreicg.so emmfilter=91 ua=6600000000000000 params=/etc/tuxbox/config/oscam/initial_snippet.bin,/etc/tuxbox/config/oscam/snippet.tbl91 ident=4ae1:fe,11 delay=100 group=2]

P.S. насколько я помню у вас в домике11 в викарде все файлы были в usr/keys , по крайней мере раньше ... тут usr/keys вообще нет 

[nosovdm]

Скрипт выгладит так.

Spoiler for Hiden:

#!/bin/sh
case "$1" in
start)
   ulimit -s 512
   sleep 1 ; start-stop-daemon -S -x /usr/bin/oscam -- -b -r 2 -c /etc/tuxbox/config/oscam &
   ;;
stop)
   exec start-stop-daemon -K -R 2 -x /usr/bin/oscam
   ;;
restart|reload)
   $0 stop
   sleep 1
   $0 start
   ;;
version)
   echo "t56"
   ;;
info)
   echo "Oscam 18-56"
   ;;
*)
   echo "Usage: $0 start|stop|restart"
   exit 1
   ;;
esac
exit 0

путь ко всем файлам по дефолту здесь etc/tuxbox/config/oscam/
запуск есть.
oscam.log

Spoiler for Hiden:

-------------------------------------------------------------------------------
>> OSCam << ymod cardserver started at Tue Sep 15 21:59:40 2015
-------------------------------------------------------------------------------
2015/09/15 21:59:40 1856 2AACB7D0 s >> OSCam << ymod cardserver started, build #1856 (mipsel-tuxbox-linux)
2015/09/15 21:59:40 1856 2AACB7D0 s version=ymod, build #1856, system=mipsel-tuxbox-linux, nice=-1
2015/09/15 21:59:40 1856 2AACB7D0 s client max. idle=120 sec, debug level=0
2015/09/15 21:59:40 1856 2AACB7D0 s max. logsize=30 Kb
2015/09/15 21:59:40 1856 2AACB7D0 s client timeout=6000 ms, fallback timeout=3000 ms, fallbacks=1, cache delay=0 ms
2015/09/15 21:59:40 1856 2AACB7D0 s version=ymod, build #1856, system=mipsel-tuxbox-linux, nice=-1
2015/09/15 21:59:40 1856 2AACB7D0 s client max. idle=120 sec, debug level=0
2015/09/15 21:59:40 1856 2AACB7D0 s max. logsize=30 Kb
2015/09/15 21:59:40 1856 2AACB7D0 s client timeout=6000 ms, fallback timeout=3000 ms, fallbacks=1, cache delay=0 ms
2015/09/15 21:59:40 1856 2AACB7D0 s Cannot open file "/etc/tuxbox/config/oscam/oscam.services" (errno=2)
2015/09/15 21:59:40 1856 2AACB7D0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/09/15 21:59:40 1856 2AACB7D0 s signal handling initialized (type=sysv)
2015/09/15 21:59:40 1856 2AACB7D0 s can't open file "/etc/tuxbox/config/oscam/oscam.srvid" (err=2), no service-id's loaded
2015/09/15 21:59:40 1856 2AACB7D0 s can't open file "/etc/tuxbox/config/oscam/oscam.tiers" (err=2), no tier-id's loaded
2015/09/15 21:59:40 1856 2AACB7D0 s can't open file "/etc/tuxbox/config/oscam/oscam.provid" (err=2), no provids's loaded
2015/09/15 21:59:40 1856 2AACB7D0 s can't open file "/etc/tuxbox/config/oscam/oscam.ird" (errno=2) irdeto guessing not loaded
2015/09/15 21:59:40 1856 2AACB7D0 s can't open file "/etc/tuxbox/config/oscam/oscam.keys" softcam keys not loaded
2015/09/15 21:59:40 1856 2AACB7D0 s monitor: disabled
2015/09/15 21:59:40 1856 2AACB7D0 s camd33: disabled
2015/09/15 21:59:40 1856 2AACB7D0 s camd35: disabled
2015/09/15 21:59:40 1856 2AACB7D0 s cs378x: disabled
2015/09/15 21:59:40 1856 2AACB7D0 s newcamd: disabled
2015/09/15 21:59:40 1856 2AACB7D0 s cccam: disabled
2015/09/15 21:59:40 1856 2AACB7D0 s radegast: disabled
2015/09/15 21:59:40 1856 2AACB7D0 s http disabled
2015/09/15 21:59:40 1856 2AACB7D0 s creating thread for device /etc/tuxbox/config/oscam/libdreemu.so
2015/09/15 21:59:40 1856 2AACB7D0 s creating thread for device /etc/tuxbox/config/oscam/libdreicg.so
2015/09/15 21:59:40 1856 2AACB7D0 s creating thread for device server
2015/09/15 21:59:40 1856 2AACB7D0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/09/15 21:59:40 1856 2AACB7D0 s waiting for local card init
2015/09/15 21:59:40 1856 2ADFC4B0 r reader thread started (thread=2ADFC4B0, label=3kemu, device=/etc/tuxbox/config/oscam/libdreemu.so, detect=cd, mhz=357, cardmhz=357)
2015/09/15 21:59:40 1856 2AE7C4B0 r reader thread started (thread=2AE7C4B0, label=3kicg, device=/etc/tuxbox/config/oscam/libdreicg.so, detect=cd, mhz=357, cardmhz=357)
2015/09/15 21:59:40 1856 2AEFC4B0 p proxy thread started  (thread=2AEFC4B0, label=shara, server=server)
2015/09/15 21:59:40 1856 2AEFC4B0 p invalid port 0 for server server
2015/09/15 21:59:40 1856 2AEFC4B0 p exit with signal 1
2015/09/15 21:59:40 1856 2AEFC4B0 p thread 2AEFC4B0 ended!
2015/09/15 21:59:41 1856 2ADFC4B0 r 3kemu card detected
2015/09/15 21:59:41 1856 2AE7C4B0 r 3kicg card detected
2015/09/15 21:59:42 1856 2ADFC4B0 r [external-reader] 3kemu: loading external library `/etc/tuxbox/config/oscam/libdreemu.so`
2015/09/15 21:59:42 1856 2ADFC4B0 r [external-reader] 3kemu: using Init2 function for external library `/etc/tuxbox/config/oscam/libdreemu.so` initialization
2015/09/15 21:59:42 1856 2ADFC4B0 r [external-reader] DRElib (dre2 <36e> emu 03 internal master key group 66) version mipsel-tuxbox-linux
2015/09/15 21:59:42 1856 2ADFC4B0 r [external-reader] loading external file keys `/etc/tuxbox/config/oscam/ee.bin`
2015/09/15 21:59:42 1856 2ADFC4B0 r [external-reader] 3kemu: CAID: 4AE1 - UA: 6600000000000000
2015/09/15 21:59:42 1856 2AE7C4B0 r [external-reader] 3kicg: loading external library `/etc/tuxbox/config/oscam/libdreicg.so`
2015/09/15 21:59:42 1856 2AE7C4B0 r [external-reader] 3kicg: using Init2 function for external library `/etc/tuxbox/config/oscam/libdreicg.so` initialization
2015/09/15 21:59:42 1856 2AE7C4B0 r [external-reader] DRElib (icg) version mipsel
2015/09/15 21:59:42 1856 2AE7C4B0 r [external-reader] using initial file `/etc/tuxbox/config/oscam/initial_snippet.bin`
2015/09/15 21:59:42 1856 2AE7C4B0 r [external-reader] 3kicg: CAID: 4AE1 - UA: 6600000000000000
2015/09/15 21:59:42 1856 2AE7C4B0 r [external-reader] 3kicg: adding provider 4AE1:0000FE, SA 66000000 (000000FE)
2015/09/15 21:59:42 1856 2AE7C4B0 r [external-reader] 3kicg: adding provider 4AE1:000011, SA 00000000 (00000011)
2015/09/15 21:59:42 1856 2AE7C4B0 r [external-reader] 3kicg: ready for requests
2015/09/15 21:59:42 1856 2AE7C4B0 r found cardsystem external
2015/09/15 21:59:42 1856 2ADFC4B0 r [external-reader] 3kemu: adding provider 4AE1:000011, SA 66000000 (00000011)
2015/09/15 21:59:42 1856 2ADFC4B0 r [external-reader] 3kemu: ready for requests
2015/09/15 21:59:42 1856 2ADFC4B0 r found cardsystem external
2015/09/15 21:59:42 1856 2AACB7D0 s init for all local cards done
2015/09/15 21:59:42 1856 2AACB7D0 s anti cascading disabled
2015/09/15 21:59:42 1856 2AEFC4B0 c plain dvbapi-client granted (root, au=on (2 reader))
2015/09/15 21:59:42 1856 2AEFC4B0 c dvbapi: 9 entries read from oscam.dvbapi
2015/09/15 21:59:46 1856 2AEFC4B0 c dvbapi: [ADD PID 0] CAID: 4AE1   ECM_PID: 0037   PROVID: 000002
2015/09/15 21:59:46 1856 2AEFC4B0 c dvbapi: [ADD PID 1] CAID: 2710   ECM_PID: 0041   PROVID: 000019
2015/09/15 21:59:46 1856 2AEFC4B0 c dvbapi: [ADD PID 2] CAID: 2710   ECM_PID: 0048   PROVID: 000018
2015/09/15 21:59:46 1856 2AEFC4B0 c dvbapi: [ADD PID 3] CAID: 4AE1   ECM_PID: 004A   PROVID: 000011   PRIVATE DATA: 102
2015/09/15 21:59:46 1856 2AEFC4B0 c dvbapi: [ADD PID 4] CAID: 4AE1   ECM_PID: 0028   PROVID: 000011
2015/09/15 21:59:46 1856 2AEFC4B0 c dvbapi: [ADD PID 5] CAID: 4AE0   ECM_PID: 0023   PROVID: 000000
2015/09/15 21:59:46 1856 2AEFC4B0 c dvbapi: [ADD PID 6] CAID: 4AE0   ECM_PID: 002E   PROVID: 000015
2015/09/15 21:59:46 1856 2AEFC4B0 c dvbapi: new program number: 697D (4AE1:697D unknown)

-------------------------------------------------------------------------------
>> OSCam << ymod cardserver started at Tue Sep 15 21:59:46 2015
-------------------------------------------------------------------------------
2015/09/15 21:59:46 1856 2AACB7D0 s >> OSCam << ymod cardserver started, build #1856 (mipsel-tuxbox-linux)
2015/09/15 21:59:46 1856 2AACB7D0 s version=ymod, build #1856, system=mipsel-tuxbox-linux, nice=-1
2015/09/15 21:59:46 1856 2AACB7D0 s client max. idle=120 sec, debug level=0
2015/09/15 21:59:46 1856 2AACB7D0 s max. logsize=30 Kb
2015/09/15 21:59:46 1856 2AACB7D0 s client timeout=6000 ms, fallback timeout=3000 ms, fallbacks=1, cache delay=0 ms
2015/09/15 21:59:46 1856 2AACB7D0 s Cannot open file "/etc/tuxbox/config/oscam/oscam.services" (errno=2)
2015/09/15 21:59:46 1856 2AACB7D0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/09/15 21:59:46 1856 2AACB7D0 s signal handling initialized (type=sysv)
2015/09/15 21:59:46 1856 2AACB7D0 s can't open file "/etc/tuxbox/config/oscam/oscam.srvid" (err=2), no service-id's loaded
2015/09/15 21:59:46 1856 2AACB7D0 s can't open file "/etc/tuxbox/config/oscam/oscam.tiers" (err=2), no tier-id's loaded
2015/09/15 21:59:46 1856 2AACB7D0 s can't open file "/etc/tuxbox/config/oscam/oscam.provid" (err=2), no provids's loaded
2015/09/15 21:59:46 1856 2AACB7D0 s can't open file "/etc/tuxbox/config/oscam/oscam.ird" (errno=2) irdeto guessing not loaded
2015/09/15 21:59:46 1856 2AACB7D0 s can't open file "/etc/tuxbox/config/oscam/oscam.keys" softcam keys not loaded
2015/09/15 21:59:46 1856 2AACB7D0 s monitor: disabled
2015/09/15 21:59:46 1856 2AACB7D0 s camd33: disabled
2015/09/15 21:59:46 1856 2AACB7D0 s camd35: disabled
2015/09/15 21:59:46 1856 2AACB7D0 s cs378x: disabled
2015/09/15 21:59:46 1856 2AACB7D0 s newcamd: disabled
2015/09/15 21:59:46 1856 2AACB7D0 s cccam: disabled
2015/09/15 21:59:46 1856 2AACB7D0 s radegast: disabled
2015/09/15 21:59:46 1856 2AACB7D0 s http disabled
2015/09/15 21:59:46 1856 2AACB7D0 s creating thread for device /etc/tuxbox/config/oscam/libdreemu.so
2015/09/15 21:59:46 1856 2AACB7D0 s creating thread for device /etc/tuxbox/config/oscam/libdreicg.so
2015/09/15 21:59:46 1856 2AACB7D0 s creating thread for device server
2015/09/15 21:59:46 1856 2AACB7D0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/09/15 21:59:46 1856 2AACB7D0 s waiting for local card init
2015/09/15 21:59:46 1856 2ADFC4B0 r reader thread started (thread=2ADFC4B0, label=3kemu, device=/etc/tuxbox/config/oscam/libdreemu.so, detect=cd, mhz=357, cardmhz=357)
2015/09/15 21:59:46 1856 2AE7C4B0 r reader thread started (thread=2AE7C4B0, label=3kicg, device=/etc/tuxbox/config/oscam/libdreicg.so, detect=cd, mhz=357, cardmhz=357)
2015/09/15 21:59:46 1856 2AEFC4B0 p proxy thread started  (thread=2AEFC4B0, label=shara, server=server)
2015/09/15 21:59:46 1856 2AEFC4B0 p invalid port 0 for server server
2015/09/15 21:59:46 1856 2AEFC4B0 p exit with signal 1
2015/09/15 21:59:46 1856 2AEFC4B0 p thread 2AEFC4B0 ended!
2015/09/15 21:59:47 1856 2ADFC4B0 r 3kemu card detected
2015/09/15 21:59:47 1856 2AE7C4B0 r 3kicg card detected
2015/09/15 21:59:48 1856 2ADFC4B0 r [external-reader] 3kemu: loading external library `/etc/tuxbox/config/oscam/libdreemu.so`
2015/09/15 21:59:48 1856 2ADFC4B0 r [external-reader] 3kemu: using Init2 function for external library `/etc/tuxbox/config/oscam/libdreemu.so` initialization
2015/09/15 21:59:48 1856 2ADFC4B0 r [external-reader] DRElib (dre2 <36e> emu 03 internal master key group 66) version mipsel-tuxbox-linux
2015/09/15 21:59:48 1856 2ADFC4B0 r [external-reader] loading external file keys `/etc/tuxbox/config/oscam/ee.bin`
2015/09/15 21:59:48 1856 2ADFC4B0 r [external-reader] 3kemu: CAID: 4AE1 - UA: 6600000000000000
2015/09/15 21:59:48 1856 2ADFC4B0 r [external-reader] 3kemu: adding provider 4AE1:000011, SA 66000000 (00000011)
2015/09/15 21:59:48 1856 2ADFC4B0 r [external-reader] 3kemu: ready for requests
2015/09/15 21:59:48 1856 2ADFC4B0 r found cardsystem external
2015/09/15 21:59:48 1856 2AE7C4B0 r [external-reader] 3kicg: loading external library `/etc/tuxbox/config/oscam/libdreicg.so`
2015/09/15 21:59:48 1856 2AE7C4B0 r [external-reader] 3kicg: using Init2 function for external library `/etc/tuxbox/config/oscam/libdreicg.so` initialization
2015/09/15 21:59:48 1856 2AE7C4B0 r [external-reader] DRElib (icg) version mipsel
2015/09/15 21:59:48 1856 2AE7C4B0 r [external-reader] using initial file `/etc/tuxbox/config/oscam/initial_snippet.bin`
2015/09/15 21:59:48 1856 2AE7C4B0 r [external-reader] 3kicg: CAID: 4AE1 - UA: 6600000000000000
2015/09/15 21:59:48 1856 2AE7C4B0 r [external-reader] 3kicg: adding provider 4AE1:0000FE, SA 66000000 (000000FE)
2015/09/15 21:59:48 1856 2AE7C4B0 r [external-reader] 3kicg: adding provider 4AE1:000011, SA 00000000 (00000011)
2015/09/15 21:59:48 1856 2AE7C4B0 r [external-reader] 3kicg: ready for requests
2015/09/15 21:59:48 1856 2AE7C4B0 r found cardsystem external
2015/09/15 21:59:48 1856 2AACB7D0 s init for all local cards done
2015/09/15 21:59:48 1856 2AACB7D0 s anti cascading disabled
2015/09/15 21:59:48 1856 2AEFC4B0 c plain dvbapi-client granted (root, au=on (2 reader))
2015/09/15 21:59:48 1856 2AEFC4B0 c dvbapi: 9 entries read from oscam.dvbapi
2015/09/15 21:59:52 1856 2AEFC4B0 c dvbapi: [ADD PID 0] CAID: 4AE1   ECM_PID: 0037   PROVID: 000002
2015/09/15 21:59:52 1856 2AEFC4B0 c dvbapi: [ADD PID 1] CAID: 2710   ECM_PID: 0041   PROVID: 000019
2015/09/15 21:59:52 1856 2AEFC4B0 c dvbapi: [ADD PID 2] CAID: 2710   ECM_PID: 0048   PROVID: 000018
2015/09/15 21:59:52 1856 2AEFC4B0 c dvbapi: [ADD PID 3] CAID: 4AE1   ECM_PID: 004A   PROVID: 000011   PRIVATE DATA: 102
2015/09/15 21:59:52 1856 2AEFC4B0 c dvbapi: [ADD PID 4] CAID: 4AE1   ECM_PID: 0028   PROVID: 000011
2015/09/15 21:59:52 1856 2AEFC4B0 c dvbapi: [ADD PID 5] CAID: 4AE0   ECM_PID: 0023   PROVID: 000000
2015/09/15 21:59:52 1856 2AEFC4B0 c dvbapi: [ADD PID 6] CAID: 4AE0   ECM_PID: 002E   PROVID: 000015
2015/09/15 21:59:52 1856 2AEFC4B0 c dvbapi: new program number: 697D (4AE1:697D unknown)

-------------------------------------------------------------------------------
>> OSCam << ymod cardserver started at Tue Sep 15 21:59:52 2015
-------------------------------------------------------------------------------
2015/09/15 21:59:52 1856 2AACB7D0 s >> OSCam << ymod cardserver started, build #1856 (mipsel-tuxbox-linux)
2015/09/15 21:59:52 1856 2AACB7D0 s version=ymod, build #1856, system=mipsel-tuxbox-linux, nice=-1
2015/09/15 21:59:52 1856 2AACB7D0 s client max. idle=120 sec, debug level=0
2015/09/15 21:59:52 1856 2AACB7D0 s max. logsize=30 Kb
2015/09/15 21:59:52 1856 2AACB7D0 s client timeout=6000 ms, fallback timeout=3000 ms, fallbacks=1, cache delay=0 ms
2015/09/15 21:59:52 1856 2AACB7D0 s Cannot open file "/etc/tuxbox/config/oscam/oscam.services" (errno=2)
2015/09/15 21:59:52 1856 2AACB7D0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/09/15 21:59:52 1856 2AACB7D0 s signal handling initialized (type=sysv)
2015/09/15 21:59:52 1856 2AACB7D0 s can't open file "/etc/tuxbox/config/oscam/oscam.srvid" (err=2), no service-id's loaded
2015/09/15 21:59:52 1856 2AACB7D0 s can't open file "/etc/tuxbox/config/oscam/oscam.tiers" (err=2), no tier-id's loaded
2015/09/15 21:59:52 1856 2AACB7D0 s can't open file "/etc/tuxbox/config/oscam/oscam.provid" (err=2), no provids's loaded
2015/09/15 21:59:52 1856 2AACB7D0 s can't open file "/etc/tuxbox/config/oscam/oscam.ird" (errno=2) irdeto guessing not loaded
2015/09/15 21:59:52 1856 2AACB7D0 s can't open file "/etc/tuxbox/config/oscam/oscam.keys" softcam keys not loaded
2015/09/15 21:59:52 1856 2AACB7D0 s monitor: disabled
2015/09/15 21:59:52 1856 2AACB7D0 s camd33: disabled
2015/09/15 21:59:52 1856 2AACB7D0 s camd35: disabled
2015/09/15 21:59:52 1856 2AACB7D0 s cs378x: disabled
2015/09/15 21:59:52 1856 2AACB7D0 s newcamd: disabled
2015/09/15 21:59:52 1856 2AACB7D0 s cccam: disabled
2015/09/15 21:59:52 1856 2AACB7D0 s radegast: disabled
2015/09/15 21:59:52 1856 2AACB7D0 s http disabled
2015/09/15 21:59:52 1856 2AACB7D0 s creating thread for device /etc/tuxbox/config/oscam/libdreemu.so
2015/09/15 21:59:52 1856 2AACB7D0 s creating thread for device /etc/tuxbox/config/oscam/libdreicg.so
2015/09/15 21:59:52 1856 2AACB7D0 s creating thread for device server
2015/09/15 21:59:52 1856 2AACB7D0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/09/15 21:59:52 1856 2AACB7D0 s waiting for local card init
2015/09/15 21:59:52 1856 2ADFC4B0 r reader thread started (thread=2ADFC4B0, label=3kemu, device=/etc/tuxbox/config/oscam/libdreemu.so, detect=cd, mhz=357, cardmhz=357)
2015/09/15 21:59:52 1856 2AE7C4B0 r reader thread started (thread=2AE7C4B0, label=3kicg, device=/etc/tuxbox/config/oscam/libdreicg.so, detect=cd, mhz=357, cardmhz=357)
2015/09/15 21:59:52 1856 2AEFC4B0 p proxy thread started  (thread=2AEFC4B0, label=shara, server=server)
2015/09/15 21:59:52 1856 2AEFC4B0 p invalid port 0 for server server
2015/09/15 21:59:52 1856 2AEFC4B0 p exit with signal 1
2015/09/15 21:59:52 1856 2AEFC4B0 p thread 2AEFC4B0 ended!
2015/09/15 21:59:53 1856 2ADFC4B0 r 3kemu card detected
2015/09/15 21:59:53 1856 2AE7C4B0 r 3kicg card detected
2015/09/15 21:59:54 1856 2ADFC4B0 r [external-reader] 3kemu: loading external library `/etc/tuxbox/config/oscam/libdreemu.so`
2015/09/15 21:59:54 1856 2ADFC4B0 r [external-reader] 3kemu: using Init2 function for external library `/etc/tuxbox/config/oscam/libdreemu.so` initialization
2015/09/15 21:59:54 1856 2ADFC4B0 r [external-reader] DRElib (dre2 <36e> emu 03 internal master key group 66) version mipsel-tuxbox-linux
2015/09/15 21:59:54 1856 2ADFC4B0 r [external-reader] loading external file keys `/etc/tuxbox/config/oscam/ee.bin`
2015/09/15 21:59:54 1856 2ADFC4B0 r [external-reader] 3kemu: CAID: 4AE1 - UA: 6600000000000000
2015/09/15 21:59:54 1856 2ADFC4B0 r [external-reader] 3kemu: adding provider 4AE1:000011, SA 66000000 (00000011)
2015/09/15 21:59:54 1856 2ADFC4B0 r [external-reader] 3kemu: ready for requests
2015/09/15 21:59:54 1856 2ADFC4B0 r found cardsystem external
2015/09/15 21:59:54 1856 2AE7C4B0 r [external-reader] 3kicg: loading external library `/etc/tuxbox/config/oscam/libdreicg.so`
2015/09/15 21:59:54 1856 2AE7C4B0 r [external-reader] 3kicg: using Init2 function for external library `/etc/tuxbox/config/oscam/libdreicg.so` initialization
2015/09/15 21:59:54 1856 2AE7C4B0 r [external-reader] DRElib (icg) version mipsel
2015/09/15 21:59:54 1856 2AE7C4B0 r [external-reader] using initial file `/etc/tuxbox/config/oscam/initial_snippet.bin`
2015/09/15 21:59:54 1856 2AE7C4B0 r [external-reader] 3kicg: CAID: 4AE1 - UA: 6600000000000000
2015/09/15 21:59:54 1856 2AE7C4B0 r [external-reader] 3kicg: adding provider 4AE1:0000FE, SA 66000000 (000000FE)
2015/09/15 21:59:54 1856 2AE7C4B0 r [external-reader] 3kicg: adding provider 4AE1:000011, SA 00000000 (00000011)
2015/09/15 21:59:54 1856 2AE7C4B0 r [external-reader] 3kicg: ready for requests
2015/09/15 21:59:54 1856 2AE7C4B0 r found cardsystem external
2015/09/15 21:59:54 1856 2AACB7D0 s init for all local cards done
2015/09/15 21:59:54 1856 2AACB7D0 s anti cascading disabled
2015/09/15 21:59:54 1856 2AEFC4B0 c plain dvbapi-client granted (root, au=on (2 reader))
2015/09/15 21:59:54 1856 2AEFC4B0 c dvbapi: 9 entries read from oscam.dvbapi

Файлы не создаются
Ну и кино нет)

[MIC71]

а содержимое oscam.conf под сполер закатай

[nosovdm]

Нечего не трогал все по дефолту

Spoiler for Hiden:

[global]
nice = -1
ecminfo_type = 2
maxlogsize = 30
logfile = /tmp/oscam.log
#logfile =  syslog:192.168.1.47:514

#[monitor]
#port = 988
#aulow  = 120
#monlevel = 1
#appendchaninfo = 1

#[webif]
#httpport = 8888
#httpuser = myusername
#httppwd = mypassword
#httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

[dvbapi]
enabled = 1
user = root
boxtype = dreambox
chaninfo = 1
au = 1

P:  4AE1:11 1
I:  4AE1:2
P:  0500:040600
P:  0500:040620
P:  0500:060A00
I:  2710:19
I:  2710:18
I:  0500:040610
I:  0500:050A00

[3kemu external /etc/tuxbox/config/oscam/libdreemu.so ua=6600000000000000 params=/etc/tuxbox/config/oscam/ee.bin ident=4ae1:11 postdr=3kicg delay=100 emmcache=1,3,2 group=1]
[3kicg external /etc/tuxbox/config/oscam/libdreicg.so emmfilter=91 ua=6600000000000000 params=/etc/tuxbox/config/oscam/initial_snippet.bin,/etc/tuxbox/config/oscam/snippet.tbl91 ident=4ae1:fe,11 delay=100 group=2]
[enable = 1 shara newcamd server port login pass]

[account]
user = root
pwd = dreambox
group=1
au = 3kemu,3kicg

[MIC71]

nosovdm
вот так порбни я перепаковал чуть
Удали старый эмуль из плагов или из папок руками , рестартани энигму , потом
кидаешь в tmp
потом с телнета
init 4
после
opkg install -force-overwrite /tmp/*.ipk
и после
init 3

Отпишись если что , тут ещё вариант есть

[nosovdm]

вот блин чудеса ... пробни эмуль тормозни и удали ee.bin и snippet.tbl91 потом опять запусти

5с назад завелся)
Спасибо.

[MIC71]

вот и чудненько